「File Formats and Other Documentation」の版間の差分

提供: Eospedia
移動: 案内、検索
(→‎Navigation File Section Data)
(→‎Navigation File Section Data)
行273: 行273:
 
|DrawnID ||Integer ||0 ||mDrawnOnMapID ||ID of map point/polygon was drawn on
 
|DrawnID ||Integer ||0 ||mDrawnOnMapID ||ID of map point/polygon was drawn on
 
|-
 
|-
−
BklshXY ||Two Floats ||0,0 ||mBacklashX/Y ||Backlash when a montage was taken or associated with item
+
|BklshXY ||Two Floats ||0,0 ||mBacklashX/Y ||Backlash when a montage was taken or associated with item
 
|-
 
|-
−
SamePosId ||Integer ||0 ||mAtSamePosID ||Items with this matching were taken at same raw stage position
+
|SamePosId ||Integer ||0 ||mAtSamePosID ||Items with this matching were taken at same raw stage position
 
|-
 
|-
−
RawStageXY ||T|wo Floats ||-10000,-10000 ||mRawStageX/Y ||Raw stage position before adjustments
+
|RawStageXY ||T|wo Floats ||-10000,-10000 ||mRawStageX/Y ||Raw stage position before adjustments
 
|-
 
|-
−
Acquire ||Integer ||0 ||mAcquire ||Flag for acquiring
+
|Acquire ||Integer ||0 ||mAcquire ||Flag for acquiring
 
|-
 
|-
−
PieceOn ||Integer ||-1 ||mPieceDrawnOn ||Index of montage piece item was drawn on (piece_#_in_X * #_of_pieces_in_Y + piece_#_in_Y), or index |-
+
|PieceOn ||Integer ||-1 ||mPieceDrawnOn ||Index of montage piece item was drawn on (piece_#_in_X * #_of_pieces_in_Y + piece_#_in_Y), or index of nearest piece if item is on a missing piece, in which case XYinPc will not be written to file.
−
of nearest piece if item is on a missing piece, in which case XYinPc will not be written to file.
+
 
|-
 
|-
−
XYinPc ||Two Floats ||-1,-1 ||mX/YinPiece ||X,Y coordinates in the montage piece, in right-handed pixels of stored montage
+
|XYinPc ||Two Floats ||-1,-1 ||mX/YinPiece ||X,Y coordinates in the montage piece, in right-handed pixels of stored montage
 
|-
 
|-
−
MapFile ||String ||Req if Map ||mMapFile ||Full or relative path of map file (see Read & Open)
+
|MapFile ||String ||Req if Map ||mMapFile ||Full or relative path of map file (see Read & Open)
 
|-
 
|-
−
MapID ||Integer ||Req if Map ||mMapID ||Unique ID (all items get one, not just maps)
+
|MapID ||Integer ||Req if Map ||mMapID ||Unique ID (all items get one, not just maps)
 
|-
 
|-
−
FocusAxisPos Float ||-1.e8 ||mFocusAxisPos ||Stored position of Focus area on inter-area axis
+
|FocusAxisPos Float ||-1.e8 ||mFocusAxisPos ||Stored position of Focus area on inter-area axis
 
|-
 
|-
−
LDAxisAngle ||Two integers ||0,0 ||mRotateFocusAxis, mFocusAxisAngle ||First value: 1 to rotate inter-area axis from tilt axis, 0 not to; second |-
+
|LDAxisAngle ||Two integers ||0,0 ||mRotateFocusAxis, mFocusAxisAngle ||First value: 1 to rotate inter-area axis from tilt axis, 0 not to; second value: angle of rotation
−
value: angle of rotation
+
 
|-
 
|-
−
FocusOffsets ||Two Floats ||0,0 ||mFocusX/Yoffset ||Offset of focus subarea in X and Y in unbinned pixels (Y inverted)
+
|FocusOffsets ||Two Floats ||0,0 ||mFocusX/Yoffset ||Offset of focus subarea in X and Y in unbinned pixels (Y inverted)
 
|-
 
|-
−
HoleArray ||Two integers ||0,0 ||mNumX/Yholes ||# of positions in X and Y for multiple Record
+
|HoleArray ||Two integers ||0,0 ||mNumX/Yholes ||# of positions in X and Y for multiple Record
 
|-
 
|-
−
SkipHoles ||List of integers ||none ||mSkipHolePos ||Pairs of X,Y indexes for positions to skip from  that array specified in HoleArray. |-
+
|SkipHoles ||List of integers ||none ||mSkipHolePos ||Pairs of X,Y indexes for positions to skip from  that array specified in HoleArray. Positions are numbered from 0 at lower-left in stage coordinates
 
|-
 
|-
−
Positions are numbered from 0 at lower-left in stage coordinates
+
TSstartEndAngles ||Two Floats ||-1.e8,-1.e8 mTSstartAngle, mTSendAngle Starting and ending angles of range for  tilt series item
 
|-
 
|-
−
TSstartEndAngles Two Floats -1.e8,-1.e8 mTSstartAngle, mTSendAngle Starting and ending angles of range for tilt series item
+
TSbidirAngle ||Float ||-1.e8 ||mTSbidirAngle ||Bidirectional starting angle for tilt series item
 
|-
 
|-
−
TSbidirAngle Float -1.e8 mTSbidirAngle Bidirectional starting angle for tilt series item
+
|TargetDefocus ||Float ||-1.e8 ||mTargetDefocus ||Target defocus for Acquire or tilt series item
 
|-
 
|-
−
TargetDefocus Float -1.e8 mTargetDefocus Target defocus for Acquire or tilt series item
+
|FileToOpen ||String ||none ||mFileToOpen ||Name of file to open for Acquire or tilt series item
 
|-
 
|-
−
FileToOpen String none mFileToOpen Name of file to open for Acquire or tilt series item
+
|TSParamIndex ||Integer ||-1 ||mTSParamIndex ||Index of into parameter array for tilt series
 
|-
 
|-
−
TSParamIndex Integer -1 mTSParamIndex Index of into parameter array for tilt series
+
|MontParamIndex ||Integer ||-1 ||mMontParamIndex ||Index into array of parameters for montages to open
 
|-
 
|-
−
MontParamIndex Integer -1 mMontParamIndex Index into array of parameters for montages to open
+
|FilePropIndex ||Integer ||-1 ||mFilePropIndex ||Index into array of file options for file to open
 
|-
 
|-
−
FilePropIndex Integer -1 mFilePropIndex Index into array of file options for file to open
+
|MapMontage ||Integer ||Req if Map ||mMapMontage ||Flag that map is a montage
 
|-
 
|-
−
MapMontage Integer Req if Map mMapMontage Flag that map is a montage
+
|MapSection ||Integer ||Req if Map ||mMapSection ||Section number in file
 
|-
 
|-
−
MapSection Integer Req if Map mMapSection Section number in file
+
||MapBinning ||Integer ||Req if Map ||mMapBinning ||Binning at which map was taken, or of initial overview map image for montage
 
|-
 
|-
−
MapBinning Integer Req if Map mMapBinning Binning at which map was taken, or of initial overview map image for montage
+
||MapMagInd ||Integer ||Req if Map ||mMapMagInd ||Magnification index of map, or of non-map image a point or polygon was drawn on
 
|-
 
|-
−
MapMagInd Integer Req if Map mMapMagInd Magnification index of map, or of non-map image a point or polygon was drawn on
+
||MapCamera ||Integer ||Req if Map ||mMapCamera Camera index
 
|-
 
|-
−
MapCamera Integer Req if Map mMapCamera Camera index
+
|MapScaleMat ||Four Floats ||Req if Map ||mMapScaleMat ||Stage to pixel scale matrix for drawing, based on pixels of initial map image.  For
−
|-
+
−
MapScaleMat Four Floats Req if Map mMapScaleMat Stage to pixel scale matrix for drawing, based on pixels of initial map image.  For |-
+
 
montage, needs to be adjusted by ratio of currently loaded map width/height to initial map width/height
 
montage, needs to be adjusted by ratio of currently loaded map width/height to initial map width/height
 
|-
 
|-
−
MapWidthHeight Two Integers Req if Map mMapWidth/Height Size of initial map image at which scale matrix was defined
+
|MapWidthHeight ||Two Integers ||Req if Map mMapWidth/Height ||Size of initial map image at which scale matrix was defined
 
|-
 
|-
−
MapMinMaxScale Two Floats 0,0 mMapMin/MaxScale Min and max scale values of image when map was defined
+
|MapMinMaxScale ||Two Floats ||0,0 ||mMapMin/MaxScale ||Min and max scale values of image when map was defined
 
|-
 
|-
−
MapFramesXY Two Integers 0,0 mMapFramesX/Y Number of montage frames when acquired
+
|MapFramesXY ||Two Integers ||0,0 ||mMapFramesX/Y|| Number of montage frames when acquired
 
|-
 
|-
−
MontBinning Integer 0 mMontBinning Actual binning of montage used to make the map
+
|MontBinning ||Integer ||0 ||mMontBinning ||Actual binning of montage used to make the map
 
|-
 
|-
−
MapExposure Float 0. mMapExposure Exposure time for original map images
+
|MapExposure ||Float ||0. ||mMapExposure ||Exposure time for original map images
 
|-
 
|-
−
MapSettling Float 0. mMapSettling Drift settling
+
|MapSettling ||Float ||0. ||mMapSettling ||Drift settling
 
|-
 
|-
−
ShutterMode Integer -1 mShutterMode Shutter mode
+
|ShutterMode ||Integer ||-1 mShutterMode ||Shutter mode
 
|-
 
|-
−
K2ReadMode Integer 0 mK2ReadMode Read mode for K2/K3 camera
+
|K2ReadMode ||Integer ||0 mK2ReadMode ||Read mode for K2/K3 camera
 
|-
 
|-
−
MapSpotSize Integer 0 mMapSpotSize Spot size at which map was taken
+
|MapSpotSize ||Integer ||0 ||mMapSpotSize ||Spot size at which map was taken
 
|-
 
|-
−
MapIntensity Double 0 mMapIntensity Intensity at which map was taken
+
|MapIntensity ||Double ||0 ||mMapIntensity ||Intensity at which map was taken
 
|-
 
|-
−
MapSlitIn Integer 0 mMapSlitIn Filter slit state when map was taken
+
|MapSlitIn ||Integer ||0 ||mMapSlitIn ||Filter slit state when map was taken
 
|-
 
|-
−
MapSlitWidth Float -1. mMapSlitWidth Filter slit width when map was taken
+
|MapSlitWidth ||Float ||-1. ||mMapSlitWidth ||Filter slit width when map was taken
 
|-
 
|-
−
RotOnLoad Integer 0 mRotOnLoad Flag to rotate when load
+
|RotOnLoad ||Integer ||0 ||mRotOnLoad ||Flag to rotate when load
 
|-
 
|-
−
RealignedID Integer 0 mRealignedID ID of lower mag map with nearby realign error
+
|RealignedID ||Integer ||0 ||mRealignedID ||ID of lower mag map with nearby realign error
 
|-
 
|-
−
RealignErrXY Two Floats 0,0 mRealignErrX/Y Final stage error of that realign operation
+
|RealignErrXY ||Two Floats ||0,0 ||mRealignErrX/Y ||Final stage error of that realign operation
 
|-
 
|-
−
LocalErrXY Two Floats 0,0 mLocalRealiErrX/Y Error in second round of realign operation
+
LocalErrXY ||Two Floats ||0,0 ||mLocalRealiErrX/Y ||Error in second round of realign operation
 
|-
 
|-
−
RealignReg Integer 0 mRealignReg Original registration of that realign
+
|RealignReg ||Integer 0 ||mRealignReg ||Original registration of that realign
 
|-
 
|-
−
ImageType Integer 0 mImageType Map file type 0-3 for MRC, IMOD, TIFF, IDOC
+
|ImageType ||Integer ||0 ||mImageType ||Map file type 0-3 for MRC, IMOD, TIFF, IDOC
 
|-
 
|-
−
MontUseStage Integer -1 mMontUseStage 1 if montage was taken with stage, 0 if not, -1 if unknown
+
|MontUseStage ||Integer ||-1 ||mMontUseStage ||1 if montage was taken with stage, 0 if not, -1 if unknown
 
|-
 
|-
−
DefocusOffset Float 0. mDefocusOffset Defocus offset for map based on View images
+
|DefocusOffset ||Float ||0. ||mDefocusOffset ||Defocus offset for map based on View images
 
|-
 
|-
−
K2ReadMode Integer 0 mK2ReadMode Read mode for K2/K3 camera
+
|K2ReadMode ||Integer ||0 ||mK2ReadMode ||Read mode for K2/K3 camera
 
|-
 
|-
−
NetViewShiftXY Two Floats 0,0 mNetViewShiftX/Y Net IS offset for a View image map
+
NetViewShiftXY ||Two Floats ||0,0 ||mNetViewShiftX/Y ||Net IS offset for a View image map
 
|-
 
|-
−
MapAlpha Integer -999 mMapAlpha JEOL alpha value
+
MapAlpha ||Integer ||-999 ||mMapAlpha ||JEOL alpha value
 
|-
 
|-
−
ViewBeamShiftXY Two Floats 0,0 mViewBeamShiftX/Y Incremental beam shift to apply for a View map
+
ViewBeamShiftXY ||Two ||Floats ||0,0 ||mViewBeamShiftX/Y ||Incremental beam shift to apply for a View map
 
|-
 
|-
−
ViewBeamTiltXY Two Floats 0,0 mViewBeamTiltX/Y Incremental beam tilt to apply for a View map
+
ViewBeamTiltXY ||Two ||Floats ||0,0 ||mViewBeamTiltX/Y ||Incremental beam tilt to apply for a View map
 
|-
 
|-
−
M|apProbeMode Integer -1 mMapProbeMode Probe mode (0 for nano, 1 for micro)
+
M|apProbeMode ||Integer ||-1 ||mMapProbeMode ||Probe mode (0 for nano, 1 for micro)
 
|-
 
|-
−
MapLDConSet Integer -1 mMapLowDoseConSet Set # (0-4) used for map taken in low dose
+
||MapLDConSet ||Integer ||-1 ||mMapLowDoseConSet ||Set # (0-4) used for map taken in low dose
 
|-
 
|-
−
MapTiltAngle Float -10000. mMapTiltAngle Tilt angle at which map was taken
+
|MapTiltAngle ||Float ||-10000. ||mMapTiltAngle ||Tilt angle at which map was taken
 
|-
 
|-
−
PtsX NumPts Floats Req mPtX X stage cordinates of points
+
|PtsX ||NumPts ||Floats ||Req ||mPtX ||X stage cordinates of points
 
|-
 
|-
−
PtsY NumPts Floats Req mPtY Y stage cordinates of points
+
|PtsY ||NumPts ||Floats ||Req ||mPtY ||Y stage cordinates of points
 
|-
 
|-
−
UserValueN String none mUserValueMap Arbitrary value set by script; N is # (currently1-8)
+
|UserValueN ||String ||none ||mUserValueMap ||Arbitrary value set by script; N is # (currently1-8)
 
|-
 
|-
 
|colspan="5"|BaseMarkerShift - a section containing a stored shift from Shift to Marker (names are from BaseMarkerShift structure).
 
|colspan="5"|BaseMarkerShift - a section containing a stored shift from Shift to Marker (names are from BaseMarkerShift structure).
 
|-
 
|-
−
|FromMag ||Integer || ||fromMagInd Mag index of map item was marked on
+
|FromMag ||Integer || ||fromMagInd ||Mag index of map item was marked on
 
|-
 
|-
 
|ToMag ||Integer || ||toMagInd ||Mag index of image with marker point
 
|ToMag ||Integer || ||toMagInd ||Mag index of image with marker point

2022年12月30日 (金) 06:00時点における版

Image Metadata Files

SerialEMは、画像のメタデータをIMOD "autodoc" フォーマットでテキストファイルに保存する。 この形式は、キーワードと値のペアをセクションと呼ばれるブロックに整理したものである。 このセクションには、さまざまな種類のデータが含まれているが、 SerialEMのファイルでは、基本的に1種類のセクションしか使用しない。 セクションは、大括弧付きのキーと値のペアで始まります。 

 [セクションタイプ = 名前]

ここで、セクションの「名前」または値は通常，ユニークに設定するが、 IMOD autodocリーダーではそうである必要はない。

セクションヘッダ以下の行は、次のような形式で表現される。 

キー = 値

そのセクションに関連するデータを提供する。 さらに、キーと値のペアは、セクション・ヘッダの前のファイルの最初に記載することもでき、これらはグローバル値として参照される。

すべての値はオートドキュメントファイルにテキスト文字列として保存されるが、特定の種類の情報を期待するソフトウェアは、これらの文字列を1つまたは複数の浮動小数点または整数値に変換することがよくある。

IMOD ライブラリ libcfshr の autodoc モジュールには、1 つ、2 つ、3 つ、または多数の浮動小数点または整数値をファイルの指定セクションに格納または取得するための関数が含まれている。 autodoc形式がSerialEMに選ばれた理由は、このライブラリがすぐに利用できること、このような関数を利用すると便利なこと、IMODのautodoc読込み機能との互換性があること、などである。

SerialEMが生成する画像関連autodocファイルには2種類ある。

1) ".mdoc "ファイルは、MRCファイルに関するデータを提供し、画像ファイルと同じ名前ですが、拡張子が".mdoc "になっています。 セクションタイプは "ZValue "で、各セクションの名前はファイル内の画像のZ値で、0から順に番号が付けられている。

2) 一連の単一画像TIFFファイルをMRCファイルと同様に扱うための情報を提供する".idoc "ファイル。 ここでのセクションタイプは "Image "で、各セクションの名称はTIFFファイルの名称である。

グローバルデータは、MRCファイルのヘッダーにある情報の一部を複製したものである。 また、MRCファイルのタイトルは "T "型のセクションヘッダに格納されます。

SerialEMが使用するIMODライブラリは、HDFファイルのメタデータにアクセスするために同じ内部オートドック構造を使用する。 したがって、これらのメタデータ情報をすべてautodoc形式のテキストファイルに抽出することは、次のようなコマンドで簡単にできる。 

extracttilts -attr filename.hdf filename.hdf.mdoc

のようなコマンドで、これらのメタデータ情報をオートドック形式のテキストファイルに抽出することができる。

Global Data

Global Data
DataMode MRC file mode
ImageSize X and Y size of images
Montage 1 if the file is a montage
ImageSeries 1 for an .idoc file describing a series of single-image files
ImageFile In a .mdoc file, contains the name of the image file
PixelSpacing Pixel spacing in Angstroms that would be in MRC header (or in 1/Angstroms for diffraction images)

Section Data

Section Data
TiltAngle Tilt angle in degrees
PieceCoordinates Pixel coordinates in X and Y and section Z value for montage piece
StagePosition X and Y stage position in microns
StageZ Z stage position in microns
Magnification "Film" magnification value
CameraLength Camera length in mm for image in diffraction mode
MagIndex Magnification index
Intensity Raw intensity value between 0 and 1
SuperMontCoords X and Y pixel coordinates of frame in a supermontage
PixelSpacing Pixel spacing in Angstroms for individual image (or in 1/Angstroms for diffraction image)
ExposureDose Dose on specimen during camera exposure in electrons/sq. A
DoseRate Dose rate to the camera, in electrons per physical pixel per second
SpotSize Microscope spot size
Defocus Relative defocus readout from microscope (microns)
TargetDefocus Current target for autofocus (microns)
ImageShift X and Y image shift in basic units (close to microns)
RotationAngle Rotation of image from having tilt axis along X axis (CCW +)
ExposureTime Image exposure time
Binning Image binning on the camera
UsingCDS 1 if image was taken with CDS mode on
CameraIndex Index of the CameraProperties section for the camera used
DividedBy2 1 if image was divided by 2
RotationAndFlip RotationAndFlip property of K2 or K3 camera
LowDoseConSet Control set index plus 1 if image taken in Low Dose, or negative of index if not in Low Dose (index 0-6 for View, Focus, Trial, Record, Preview, Search, Mont-map; 7 for tracking, 8 for montage)
MinMaxMean Minimum, maximum, and mean value for this image
PriorRecordDose For an image in a tilt series taken in Low Dose mode, the cumulative dose in the Record area prior to this image, including Record and Preview images and View i mages taken in tasks
XedgeDxy Edge displacement in X and Y for montage piece to the right of this piece
YedgeDxy Edge displacement in X and Y for piece above this piece
XedgeDxyVS Edge displacement for piece to right, computed with very sloppy option
YedgeDxyVS Edge displacement for piece above, computed with very sloppy option
StageOffsets minus the nominal stage position of the piece.
AlignedPieceCoords Piece coordinates adjusted by the solved shifts for each piece when pieces are aligned in overview with 'Very sloppy' option off.
AlignedPieceCoordsVS Piece coordinates adjusted by the solved shifts for each piece when pieces are aligned in overview with 'Very sloppy' option on.
SubFramePath Directory or file in which subframes of exposure were stored
NumSubFrames Number of subframes stored
FrameDosesAndNumbers Dose per frame in electrons per square Angstrom followed by number of frames at that dose; variable-sized frame sums will have multiple pairs of such values
DateTime Time and date of image acquisition; the format of the date is dd-Mon-yy regardless of locale.
NavigatorLabel Label of Navigator item, added if Acquire at Items is being run and a tilt series is not
FilterSlitAndLoss Energy filter slit width and energy loss if slit is in, 0 0 otherwise
ChannelName Detector name for a STEM image
MultishotHoleAndPosition Hole identifier and position within hole when taking multiple record images; peripheral positions are numbered from 1 and the center is numbered 0. For a regular pattern, hole identifiers are a pair of numbers relative to the center of the pattern; for a custom pattern, they are simply numbers starting at 1.
CameraPixelSize For diffraction image, the size of the image pixel on the camera in microns, namely the physical chip pixel size times the binning.
Voltage High voltage in kV for diffraction image.

Direct Electron Specific Section Data

DE12-CameraPosition ||Whether camera was retracted or inserted DE12-ProtectionCoverMode ||Whether protection cover is kept open or open and closed for this shot DE12-ProtectionCoverOpenDelay(ms) ||Delay after opening prtection cover DE12-TemperatureDetector(C) ||Detector temperature DE12-FaradayPlatePeakReading(pA/cm2) ||Current reading from Faraday plate during exposure
Direct Electron Specific Section Data
DE12-ServerSoftwareVersion Server software version
DE12-PreexposureTime(s) Pre-exposure time
DE12-TotalNumberOfFrames Total number of frames in acquisition
DE12-FramesPerSecond Frame rate in frames per second
DE12-SensorModuleSerialNumber Serial number of sensor
DE12-SensorReadoutDelay(ms) Delay before starting to read out sensor during exposure
DE12-IgnoredFramesInSummedImage Number of frames ignored in a summed image

Additional Data in MontSection

Additional Data in MontSection
FullMontSize Full size of montage in X and Y if all pieces are present
BufISXY Image shift associated with overview buffer
ProbeMode 1 for microporbe, 0 for nanoprobe
MoveStage 1 if for a stage montage
ConSetUsed Control set used for the montage (0 = View, 3 = Record, 5 = Search, 6 = MontMap
MontBacklash The nominal backlash for this montage, or 0 0 if using an anchor at the center
ValidBacklash The nominal backlash for this montage, or 0 0 if using an anchor at the center or doing a zigzag pattern
DriftSettling Drift settling in control set used
CameraModes Shutter mode and read mode
FocusOffset Focus offset for low dose View or Search, assigned to map item DefocusOffset if a map is made
NetViewShifts Image shift offsets for low dose View or Search
ViewBeamShifts Beam shift offsets for low dose View or Search
ViewBeamTilts Incremental beam tilts for low dose View or Search
ViewDefocus Focus offset for low dose View or Search, assigned to image buffer when reading in
Alpha Alpha value on JEOL
FilterState 0/1 if slit is out/in, and slit width

Navigator File for serialEM

SerialEM Navigator　Fileに関する説明になります。

下記の翻訳に　なります。 [https://bio3d.colorado.edu/SerialEM/stableHlp/html/about_formats.htm#navigator ]

SerialEM 3.6では、Navigatorの出力が1項目につき1行のタブ区切り形式からオートドック形式に変更され、代わりにXMLとして出力するオプションが追加されている。 XMLやautodocファイルは、以前のバージョンのタブ区切りファイルと同様に、読み挙げることができる。

グローバル・データは2行あります。 

 AdocVersion = x.xx
 LastSavedAs = xy.nav

という2行のグローバルデータがあり、2行目は最後に保存したときのファイルの完全な絶対パスとファイル名である。

次に、各項目は'Item'タイプのセクションにあり、そのラベル文字列を値として持つ。

次の表は、セクションに出現するすべてのキー、期待される値の種類、それが必須かどうか、必須でない場合はどのようなデフォルト値が設定されるかを示したものである。

Navigation File Section Data

TSstartEndAngles ||Two Floats ||-1.e8,-1.e8 mTSstartAngle, mTSendAngle Starting and ending angles of range for tilt series item TSbidirAngle ||Float ||-1.e8 ||mTSbidirAngle ||Bidirectional starting angle for tilt series item LocalErrXY ||Two Floats ||0,0 ||mLocalRealiErrX/Y ||Error in second round of realign operation NetViewShiftXY ||Two Floats ||0,0 ||mNetViewShiftX/Y ||Net IS offset for a View image map MapAlpha ||Integer ||-999 ||mMapAlpha ||JEOL alpha value ViewBeamShiftXY ||Two ||Floats ||0,0 ||mViewBeamShiftX/Y ||Incremental beam shift to apply for a View map ViewBeamTiltXY ||Two ||Floats ||0,0 ||mViewBeamTiltX/Y ||Incremental beam tilt to apply for a View map M|apProbeMode ||Integer ||-1 ||mMapProbeMode ||Probe mode (0 for nano, 1 for micro)
Key Type of value Default value, or Required CMapDrawItem member(s) Description
Color Integer Req mColor Color index (0-5)
StageXYZ Three Floats Req (unless external) mStageX/Y/Z Stage position adjusted for current mag
NumPts Integer Req mNumPoints Number of points
Corner Integer 0 mCorner Flag for corner point
Draw Integer 1 mDraw Flag to draw
RegPt Integer 0 mRegPoint Registration point number
Regis Integer Req mRegistration Registration at which item exists
Type Integer Req mType Type: 0-2 for point, polygon, map
Note String blank mNote Note string
GroupID Integer 0 mGroupID ID of group thatitem belongs to
PolyID Integer 0 mPolygonID ID of polygon used to define supermontage
FitToPolygonID Integer 0 mFitToPolygonID ID of polygon that this montage map was fit to
Imported Integer 0 mImported Indicator of an imported map or point drawn on one
RegisteredToID Integer 0 mRegisteredToID For an imported map, ID of map that it was registered to for transforming
SuperMontXY Two Integers -1,-1 SuperMontX/Y Camera coordinate of a montage in supermontage
OrigReg Integer Regis mOriginalReg Original registration (default is Registration)
DrawnID Integer 0 mDrawnOnMapID ID of map point/polygon was drawn on
BklshXY Two Floats 0,0 mBacklashX/Y Backlash when a montage was taken or associated with item
SamePosId Integer 0 mAtSamePosID Items with this matching were taken at same raw stage position
RawStageXY wo Floats -10000,-10000 mRawStageX/Y Raw stage position before adjustments
Acquire Integer 0 mAcquire Flag for acquiring
PieceOn Integer -1 mPieceDrawnOn Index of montage piece item was drawn on (piece_#_in_X * #_of_pieces_in_Y + piece_#_in_Y), or index of nearest piece if item is on a missing piece, in which case XYinPc will not be written to file.
XYinPc Two Floats -1,-1 mX/YinPiece X,Y coordinates in the montage piece, in right-handed pixels of stored montage
MapFile String Req if Map mMapFile Full or relative path of map file (see Read & Open)
MapID Integer Req if Map mMapID Unique ID (all items get one, not just maps)
FocusAxisPos Float -1.e8 mFocusAxisPos Stored position of Focus area on inter-area axis
LDAxisAngle Two integers 0,0 mRotateFocusAxis, mFocusAxisAngle First value: 1 to rotate inter-area axis from tilt axis, 0 not to; second value: angle of rotation
FocusOffsets Two Floats 0,0 mFocusX/Yoffset Offset of focus subarea in X and Y in unbinned pixels (Y inverted)
HoleArray Two integers 0,0 mNumX/Yholes # of positions in X and Y for multiple Record
SkipHoles List of integers none mSkipHolePos Pairs of X,Y indexes for positions to skip from that array specified in HoleArray. Positions are numbered from 0 at lower-left in stage coordinates
TargetDefocus Float -1.e8 mTargetDefocus Target defocus for Acquire or tilt series item
FileToOpen String none mFileToOpen Name of file to open for Acquire or tilt series item
TSParamIndex Integer -1 mTSParamIndex Index of into parameter array for tilt series
MontParamIndex Integer -1 mMontParamIndex Index into array of parameters for montages to open
FilePropIndex Integer -1 mFilePropIndex Index into array of file options for file to open
MapMontage Integer Req if Map mMapMontage Flag that map is a montage
MapSection Integer Req if Map mMapSection Section number in file
MapBinning Integer Req if Map mMapBinning Binning at which map was taken, or of initial overview map image for montage
MapMagInd Integer Req if Map mMapMagInd Magnification index of map, or of non-map image a point or polygon was drawn on
MapCamera Integer Req if Map mMapCamera Camera index
MapScaleMat Four Floats Req if Map mMapScaleMat Stage to pixel scale matrix for drawing, based on pixels of initial map image. For

montage, needs to be adjusted by ratio of currently loaded map width/height to initial map width/height

MapWidthHeight Two Integers Req if Map mMapWidth/Height Size of initial map image at which scale matrix was defined
MapMinMaxScale Two Floats 0,0 mMapMin/MaxScale Min and max scale values of image when map was defined
MapFramesXY Two Integers 0,0 mMapFramesX/Y Number of montage frames when acquired
MontBinning Integer 0 mMontBinning Actual binning of montage used to make the map
MapExposure Float 0. mMapExposure Exposure time for original map images
MapSettling Float 0. mMapSettling Drift settling
ShutterMode Integer -1 mShutterMode Shutter mode
K2ReadMode Integer 0 mK2ReadMode Read mode for K2/K3 camera
MapSpotSize Integer 0 mMapSpotSize Spot size at which map was taken
MapIntensity Double 0 mMapIntensity Intensity at which map was taken
MapSlitIn Integer 0 mMapSlitIn Filter slit state when map was taken
MapSlitWidth Float -1. mMapSlitWidth Filter slit width when map was taken
RotOnLoad Integer 0 mRotOnLoad Flag to rotate when load
RealignedID Integer 0 mRealignedID ID of lower mag map with nearby realign error
RealignErrXY Two Floats 0,0 mRealignErrX/Y Final stage error of that realign operation
RealignReg Integer 0 mRealignReg Original registration of that realign
ImageType Integer 0 mImageType Map file type 0-3 for MRC, IMOD, TIFF, IDOC
MontUseStage Integer -1 mMontUseStage 1 if montage was taken with stage, 0 if not, -1 if unknown
DefocusOffset Float 0. mDefocusOffset Defocus offset for map based on View images
K2ReadMode Integer 0 mK2ReadMode Read mode for K2/K3 camera
MapLDConSet Integer -1 mMapLowDoseConSet Set # (0-4) used for map taken in low dose
MapTiltAngle Float -10000. mMapTiltAngle Tilt angle at which map was taken
PtsX NumPts Floats Req mPtX X stage cordinates of points
PtsY NumPts Floats Req mPtY Y stage cordinates of points
UserValueN String none mUserValueMap Arbitrary value set by script; N is # (currently1-8)
BaseMarkerShift - a section containing a stored shift from Shift to Marker (names are from BaseMarkerShift structure).
FromMag Integer fromMagInd Mag index of map item was marked on
ToMag Integer toMagInd Mag index of image with marker point
ShiftX Float shiftX X component of shift in microns
ShiftY Float shiftY Y component of shift in microns
T|SParam - a section containing tilt series parameters. See TiltSeriesParam.h in the source code for a description of each item.
MontParam - a section containg montage parameters. See MontageParam.h in the source code for a description of each item.
FileOptions - a section containing properties for opening a file. See FileOptions.h in the source code in case this has descriptions.

「https://www.yasunaga-lab.bio.kyutech.ac.jp/EosJ/index.php?title=File_Formats_and_Other_Documentation&oldid=17301」から取得