mrcImageCTFDetermination
提供: Eospedia
mrcImageCTFDeterminationとはCTFの推定の為のプログラムである。
オプション一覧
メインオプション
オプション | 必須項目/選択項目 | 説明 | デフォルト |
---|---|---|---|
-i | 必須 | 入力ファイル設定: mrcImage(Original Image) | NULL |
-r | 必須 | 参照ファイル設定: mrcImage(CTF) | NULL |
-o | 選択 | 出力: Optimum [text] defocus and amplitude-contrast at minimum point |
stdout |
-oP | 選択 | 出力: Distribution: mrcImage | NULL |
-oC | 選択 | 出力: CTF Information file Type (-mC) |
NULL |
-oF | 選択 | 出力: Result FFT: mrcImage | NULL |
-kV | 選択 | AccVol[kV] | 200 |
-Cs | 選択 | Cs[mm] | 2.1 |
-Ain | 選択 | IlluminationAperture[mrad] | 0.02 |
-W | 選択 | ホワイトノイズ | 1.0 |
-df | 選択 | df[A] for in(mindf, maxdf, deldf) | (0.0, 200000, 1000) |
-AoveP | 選択 | AoverP[A] for in(minAoverP, maxAoverP, delAoverP) | (0.0, 1.0, 0.01) |
-Rmin | 選択 | Rmin[/A] | 0.0 |
-Rmax | 選択 | Rmax[/A] | 0.1 |
-mF | 選択 | Filter Type | 1 |
-mW | 選択 | Wight Type | 0 |
-mS | 選択 | Sum Type | 0 |
-mC | 選択 | CTF Information Type | 0 |
-M | 選択 | ref Type | 0 |
-PiselSize | 選択 | Pixel Size [A] | 5 |
-Width | 選択 | Pad Width [pixel] | 120 |
-truePitch | 選択 | True Pitch [A] | 700 |
-dfRef | 選択 | dfRef for ref(firstDf, withinDf) | (70000, 1000) |
-AoverPRef | 選択 | A over P Ref for ref(firstAoverP, withinAoverP) | (0.05, 0.01) |
-MaxIter | 選択 | MaxIteration for ref | 10 |
-c | 選択 | コンフィグファイル設定 | NULL |
-m | 選択 | モードを設定 | 0 |
-h | 選択 | ヘルプを表示 |
-mF の詳細
モード | 説明 |
---|---|
0 | CTF補正しない |
1 | 位相のみ: W = CTF/|CTF| |
2 | 乗算 : W = CTF |
3 | 乗算 : W = 1/CTF |
4 | ウィーナーフィルタ (ノイズ定数): W = CTF/(|CTF|^2+N^2) |
5 | 乗算 : W = CTF^2 |
-mW の詳細
モード | 説明 |
---|---|
0 | Weight = 1 |
1 | Weight = (|in| + |ref|)/2 |
-mS の詳細
モード | 説明 |
---|---|
0 | Sigma[Phase(i)] |
1 | Sigma[Phase(i)*Weight(i)] / Sigma[Weight(i)] |
-M の詳細
モード | 説明 |
---|---|
0 | 単一イメージでCTF補正 |
1 | Three-dimentional reconstruction images that were made by nea and far Bessel separation. デフォーカスの最小値-最大値間でCTF補正が行われる。 |
2 | Result FFT (オプション) -oF, -dfRef, -AoverPRef |