mrcImagePrint
提供: Eospedia
オプション一覧
メインオプション
オプション | 必須項目/選択項目 | 説明 | デフォルト |
---|---|---|---|
-i | 必須 | 入力ファイル: mrcImage | NULL |
-o | 選択 | 出力ファイル: テキスト | stdout |
-H | 選択 | High Threshold | 0.0 |
-L | 選択 | Low Threshold | 1.0 |
-Section | 選択 | [z|x|y]Section | z |
-x | 選択 | x section:(xMin, xMax) | (0, 0) |
-y | 選択 | y section:(yMin, yMax) | (0, 0) |
-z | 選択 | z section:(zMin, zMax) | (0, 0) |
-S | 選択 | Scale(Centre is Bottom Left): -S 1 := 1 mm/pixel | 1.0 |
-AS | 選択 | Scale(Centre is Bottom Left): -AS 1 := 1 mm/A (Real) or 1 mm/A-1 (Fourier Space) | 1.0 |
-E | 選択 | Enlargement(image center is center) | 1.0 |
-center | 選択 | Center of a printed image(in case of FT or N.x/2.0 in case of Image):(cx, cy) | (0.0, 0.0) |
-C | 選択 | ContourLevel | 1.0 |
-I | 選択 | Black is High Density | |
-A | 選択 | HighThres=Mean-SD, LowThres=Mean+SD | |
-AC | 選択 | Auto Contour(thresHigh <-> mean) | 10 |
-PC | 選択 | Peak Contour(thresHigh <-> (mean+thresHigh)/2 | 10 |
-AC2 | 選択 | Auto Contour2(thresHigh <-> thresLow) | 10 |
-Y | 選択 | Y-axis expanding | 1 |
-RGB | 選択 | Contour Color Mode: RGB:(Red, Green, Blue) | (0, 0, 0) |
-RGBGradient | 選択 | Contour Color GradientMode: RGB:(RedFirst, GreenFirst, BlueFirst, RedLast, GreenLast, BlueLast) | (0, 0, 0, 0, 0, 0) |
-HSB | 選択 | Contour Color Mode: HSB:(Hue, Saturation, Brightness) | (0, 0, 0) |
-HSBGradient | 選択 | Contour Color GradientMode: HSB:(HueFirst, SaturationFirst, BrightnessFirst, HueLast, SaturationLast, BrightnessLast) | (0, 0, 0, 0, 0, 0) |
-LineColourRGB | 選択 | Contour Color Mode: RGB:(LineRed, LineGreen, LineBlue) | (0, 0, 0) |
-LineColourRGBGradient | 選択 | Contour Color GradientMode: RGB:(LineRedFirst, LineGreenFirst, LineBlueFirst, LineRedLast, LineGreenLast, LineBlueLast) | (0, 0, 0, 0, 0, 0) |
-LineColourHSB | 選択 | Contour Color Mode: HSB:(LineHue, LineSaturation, LineBrightness) | (0, 0, 0) |
-LineColourHSBGradient | 選択 | Contour Color GradientMode: HSB:(LineHueFirst, LineSaturationFirst, LineBrightnessFirst, LineHueLast, LineSaturationLast, LineBrightnessLast) | (0, 0, 0, 0, 0, 0) |
-LineChange | 選択 | Contour Color Change | 0.1 |
-LineWidthStart | 選択 | Contour Line Width Start | 0.1 |
-LineWidthStep | 選択 | Contour Line Width Step | 0.05 |
-ReverseOrder | 選択 | Reverse Print Order | |
-Untwist | 選択 | Untwist Angle [degree/A], example: (-13,28) = 0.4709576 | 0.0 |
-UpsideDown | 選択 | Upside Down | |
-Centre | 選択 | Image Centre is at the centre of paper. | |
-CircleRadius | 選択 | Radius of circles in the case of imageCircles | 0.5 |
-c | 選択 | コンフィグファイル設定 | NULL |
-m | 選択 | モードを設定 | 0 |
-h | 選択 | ヘルプを表示 |
モードの詳細
モード | 説明 |
---|---|
0 |